I have installed in my DM8000 HD PVR the latest CVS image from (image release 3.2.1 from ) and then I installed the GP3 wizard (Gemini version 0.47 r4). Riparazione File Danneggiati Word Of The Day. After that I installed the custom repositorie so that I can have access to the softcams for Gemini 3. I decided to use the Mgcamd 1.38 (along with the config package) for my box. I have uploaded my newcamd.list file and everything is ready. The problem is that I don't know how to activate the emu in my Dreambox.

As I can see from Blue Panel-->Information-->Installed Camds, the active camd is the 'Common Interface'. In this list I can see the dccamd and also the mgcamd (both deactivated of course). I know that GP3 has removed support for softcams and that there is no option for switching between them via GUI. I have read a method here but it doesn't apply anymore. To be precise, the bootup file exists in /etc/init.d but there is no such line to change.

Also, the 'ipkg purge' command is 'ipkg remove' now. Download Free Buku Biologi Kelas Xi Erlangga Pdf Printer. This is no surprise for me, as these instructions are 3 years old and obviously a lot of code has been changed in CVS images.

Is there any newer method to activate mgcamd or cccam? I mean to activate an installed emu via telnet commands or ftp. Thank you for your time. Hello Renard and thank you for your fast reply.

Indeed, by following your advice I managed to activate mgcamd 1.38 and now I am satisfied by the result. If you notice, I have said: 'After that I installed the custom repositories so that I can have access to the softcams for Gemini 3'.

Feb 11, 2013. The CCcam.cfg file with the CCcam settings can be edited by FTPing to your DreamBox. The file can be found at the following locations: DreamBox 500 C: /var/etc/CCcam.cfg DreamBox 800 C: /etc/CCcam.cfg. A sample CCcam.cfg config file can be downloaded below: Sample CCcam.cfg.

The moderator has removed my reference to onestep, due to policy reasons. I have already installed those feeds. Anyway, thank you again. I have spent many hours trying to find something easy. BTW, do you also have GP3 installed, Renard? Which is your opinion for Gemini 3? I read everywhere that other images are better for Dreambox HD receivers.

I have good memories from DM500S and Gemini Project, that's why I chose it again for my 8000 HD. Do you think I should try Newenigma for example? Thank you, my friend.

Ok mate I install GSU 4.03 and restart the box Blue>Glassy UnivCam Manager>Download CAM/SRV and install I select cccam2.2.1 for cam and newcs1.70 for SRV i don't know what to do next Insert your CCcam detail in CCcam.cfg using FTP (eg. Make sure that no other emu is selected from the blue button menue. Select an incrypted channel From Addon menu (notrmally Green button) select Glass univcam utility. Using the curser keys R/L select CCcam then OK or Green button. Wait message or picture to clear. Insert your CCcam detail in CCcam.cfg using FTP (eg.

Make sure that no other emu is selected from the blue button menue. Select an incrypted channel From Addon menu (notrmally Green button) select Glass univcam utility. Using the curser keys R/L select CCcam then OK or Green button. Wait message or picture to clear.

Thanks before you post it i figure it out myself These are the steps i taken • Installing Glass System Utility 4.03 • Blue>Glassy UnivCam Manager>Download CAM/SRV and install • Installing CCcam 2.2.1 • Select CCcam as CAM • Press the yellow button • Reset the box • Putting CCcam.cfg in /etc • Blue>Glassy UnivCam Manager • Restart the CAM • Waiting to start.